B4000 V6-4.0L SOHC (2005)
Front Door Window Glass: Service and Repair
Door Glass
DOOR GLASS FRONT REMOVAL / INSTALLATION
NOTE: Position the door glass half-way up to gain access to the rivets.
1. Remove the front door trim panel and watershield.
2. Remove in order shown in figure.
1. Bolt
2. Door glass run retainer
3. Rivets
-
Support window glass before removing the rivets.
-
Use a drift punch to remove the steel centers and a 6.35 mm (1/4 in) diameter drill bit to remove the rivets.
4. Door glass
3. Install in reverse order of removal.