B4000 2WD V6-4.0L OHV (1994)
Clutch Switch: Testing and Inspection
Component (M/T Only)
Clutch Pedal Position Switch (Test Connections)
INSPECTION
1. Disconnect the clutch pedal position switch connector.
2. Connect an ohmmeter to the switch, as shown.
3. Check the continuity of the switch between the terminals, as shown.
-
With clutch pedal DEPRESSED--Continuity Exists.
-
With clutch pedal RELEASED--No Continuity Exists.
4. If not as specified, replace the clutch pedal position switch.