B4000 2WD V6-4.0L OHV (1994)
Ignition Cable: Testing and Inspection
VISUAL INSPECTION
-
Wipe the High-Tension Leads with a clean, damp cloth prior to inspection. Without removing High-Tension Leads from the spark plugs or Coil
Pack inspect the Leads for visible damage such as cuts, pinches, cracks or torn boots. Replace damaged High-Tension Leads as necessary.
View: Ohm Testing High-Tension Lead
RESISTANCE CHECK
-
Remove High-Tension Lead.
-
Connect a suitable Ohm meter to the High-Tension Lead, as shown.
-
Measure the resistance of each lead.
Resistance should be less than 22.9 K Ohms per 1m (3.28 ft.).