B4000 2WD V6-4.0L OHV (1994)
Clutch Pedal Assembly: Service and Repair
REMOVAL/INSTALLATION
1. Remove left side plastic kick panel.
2. Disconnect the clutch master cylinder push rod by prying the retainer bushing and push rod off of the pedal.
3. Remove the bolts securing parking brake mechanism. Swing the mechanism out of the way.
4. Remove in the order shown in the figure.
5. Inspect all parts and repair or replace as necessary.
6. Install in the reverse order of the removal.
CLUTCH PEDAL POSITION SWITCH
REMOVAL/INSTALLATION
1. Remove in the order shown in the figure, referring to Removal Note.
2. Install in the reverse order of removal.
