B4000 2WD V6-4.0L SOHC (2003)
2. Install the 12 mm bolts and tighten in the sequence shown.
3. Install the two 8 mm bolts.
4. Tighten the eight 12 mm bolts in the sequence shown in two stages.
^
Stage 1: Tighten the bolts 80 degrees.
^
Stage 2: Tighten the bolts an additional 80 degrees.
Caution:
^
The camshaft sprocket must turn freely on the camshaft. DO NOT tighten the bolt.
5. Install the front camshaft bolt.
