B4000 2WD V6-4.0L SOHC (2003)
9. Install the passive anti-theft system (PATS) transmitter.
1. Position the PATS transmitter.
2. Install the PATS transmitter retaining screw.
10. Reposition the upper steering column shroud.
11. Install the lower steering column shroud.
1. Position the lower steering column shroud.
2. Install the screws.
12. Install the ignition switch lock cylinder.
1. Position the ignition switch lock cylinder to the RUN position.
2. Insert the ignition switch lock cylinder into the steering column.
3. Make sure the ignition switch lock cylinder is fully seated and aligned in the interlocking washer before turning the key to the OFF position.
