B4000 2WD V6-4.0L SOHC (2003)
8. Remove the front shock absorber.
1. Remove the two nuts.
2. Remove the front shock absorber.
9.Remove the tie rod castellated nut.
1. Remove the cotter pin.
2. Remove the castellated nut.
10. Use Pitman Arm Puller or equivalent to separate the tie rod end from the front wheel spindle.
11. Use a coil spring compressor or equivalent to compress the coil spring.
12. Remove the lower ball joint castellated nut.
1. Remove the cotter pin.
2. Remove the castellated nut.
