B4000 2WD V6-4.0L SOHC (2003)
Shift Cable: Adjustments
Shift Cable and Bracket
SHIFT CABLE AND BRACKET ADJUSTMENT
1. Place the gearshift lever in the D position and hang a 1.4 kg (3 lb) weight on the shift control selector lever.
(1) Move the selector lever to the first gear position, then move back two detents to the D position.
(2) Hang the 3.6 kg (8 lb) weight on the gearshift lever.
2. Raise and support the vehicle.
3. Disconnect the transmission shift cable from the manual control lever.
4. Pull out the transmission shift cable adjustment lock tab on the shift cable body.
5. Place the manual control lever in the D position.
(1) Rotate the manual control lever fully counterclockwise.
(2) Rotate the manual control lever clockwise to the D position (2 detents).
6. Connect the transmission shift cable to the manual control lever.
