B4000 2WD V6-4.0L SOHC (2003)
9. Remove the reservoir.
10. Remove the three pushpins, four bolts, four screws and the inner fender splash shield.
11. Unclip the hydraulic line-to-frame retainer.
Caution:
^
Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface wash the surface with water
immediately.
12. Unlock and remove the clutch master cylinder assembly.
(1) Rotate the master cylinder 45 degrees clockwise to unlock it from the support bracket.
13. Remove the reservoir, the hydraulic line and the clutch master cylinder as an assembly.
Caution:
^
Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface wash the surface with water
immediately.
14. To install, reverse the removal procedure.
(1) Bleed the clutch system.