B4000 4WD V6-4.0L OHV (1995)
C. REPAIR PROCEDURE
INSPECTION PROCEDURE
1. Disconnect the harness connector (B) from the CCDS (A).
2. Inspect the harness connector (B) for the presence of brake fluid.
- If brake fluid IS NOT present, install Universal Fused Jumper Harness. See PROCEDURE 1.
- If brake fluid IS present, replace CCDS. See PROCEDURE 2.
Procedure 1 - For Vehicles With Non-Leaking Switches
PROCEDURE 1 - For vehicles with non-leaking switches
UNIVERSAL FUSED JUMPER HARNESS INSTALLATION