B4000 4WD V6-4.0L OHV (1995)
6.
Position lock cylinder housing on steering shaft and upper column lock actuator. Refer to Fig. 16.
7.
Position steering column tilt spring on lock housing and compress tilt spring with a 6" C-clamp or equivalent Refer to Fig 17. (if applicable).
8.
Lubricate shoulder area of two (2) pivot bolts and install pivot bolts.
^
Tighten pivot bolts to 18-26 Nm (14-19 lb-ft). Refer to Fig. 18.
^
Remove two (2) nuts or spacers from lock levers.