B4000 4WD V6-4.0L OHV (1995)
OVERHAUL
1. Disassemble in the order shown in the figure.
2. Inspect all parts and repair or replace as necessary.
3. Assemble in the reverse order of disassembly.
(1) Retaining ring
(2) Clutch release collar Inspection
(3) Spring
(4) Clutch release cylinder
Clutch release cylinder
Install the clutch release cylinder.
Tightening torque: 19.1-25.9 N.m {1.9-2.6 kgf.m, 14.1-19.1 ft.lbf}
INSPECTION
Release collar travel
1. Remove the rubber plug from the inspection port in the side of the transmission housing.
