B4000 4WD V6-4.0L OHV (1995)
Flex Plate: All Technical Service Bulletins
A/T - Noise/Vibration/No Drive Engagement
05-013/02
1995-1996 B4000 - 4.0L OHV AUTOMATIC TRANSMISSION, NOISE OR VIBRATION, POSSIBLE DUE TO A CRACKED FLEX PLATE
APPLICABLE MODEL(S)/VINs
1995 - 1996 B4000 (Automatic Transmission Only)
DESCRIPTION
Some vehicle equipped with 4.0L OHV engine and automatic transmission may exhibit a noise or vibration, no drive engagement, unusual noise during
cranking or a no crank condition. This may be caused by a cracked flex plate/drive plate.
REPAIR PROCEDURE
1.
Verify customer concern.
2.
Verify starter operates properly:
^
Starter operates properly, proceed to step 3.
^
Starter does not operate properly, diagnose using appropriate workshop manual (Section G ENGINE ELECTRICAL SYSTEM).
3.
Replace flex plate/drive plate using workshop manual (section K DRIVE PLATE Removal / Installation).
4.
Verify repair.
PART(S) INFORMATION
Disclaimer