B4000 Regular Cab 4WD V6-4.0L OHV (1997)
1. Position the crankshaft position sensor on engine.
2. Install the two sensor screws.
CAUTION
^
Do not overtighten crankshaft position sensor screws.
Tightening torques:
3.0L: 5 - 7 N.m {46 - 70 kgf.cm, 40 - 61 in.lbf}
4.0L: 9 - 12 N.m {92 - 121 kgf.cm, 75 - 106 in.lbf}
3. Lower vehicle. (3.0L only).
4. Route the sensor harness and connect the harness connector.
5. Connect the negative battery cable.