B4000 Regular Cab 4WD V6-4.0L OHV (1997)
Clutch Pedal Position Switch: Service and Repair
REMOVAL
Remove in the order shown in the illustration, referring to the following notes:
Plastic Retainer (2)
^
Remove the retainer as shown in the illustration.
Clutch Pedal Position Switch (3)
1. Pull the orientation clip away from the switch to separate from the pin on the switch.
2. Rotate the switch to expose the location of the plastic retainer.
3. Remove the switch from the push rod.
INSTALLATION
Install in the reverse order of removal.