B4000 Regular Cab 4WD V6-4.0L OHV (1997)
Rubber Boot (12)
^
If removing the right front drive axle shaft, remove the rubber boot from the front drive axle shaft.
Oil Seal (13)
1. On Dana 35 axles, remove the oil seal using the SST and Seal Remover TOOL-1175-AC, or equivalent.
2. On Dana 28 axles, remove the oil seal using the SST and Bearing Cup Puller T77F-1102-A, or equivalent.
NOTE: SST number: 49 0223 630B Impact Slide Hammer
Bearing (14)
1. On Dana 35 axles, remove the bearing using the SST and Seal Remover TOOL- 1175-AC. or equivalent.
2. On Dana 28 axles, remove the bearing using the SST and Bearing Cup Puller T77F-1102-A, or equivalent.
NOTE: SST number: 49 0223 630B impact Slide Hammer
Slinger (15)
^
Remove the slinger by driving it off with a hammer.
INSPECTION
Inspect all of the parts and repair or replace as necessary.
INSTALLATION
Install in the reverse order of removal, referring to installation note:
Slinger (15)
^
Install a new slinger using a press and the SST.
Bearing (14)
^
Install the bearing using the SSTs.
NOTE:
