B4000 Regular Cab 4WD V6-4.0L OHV (1997)
^
Install the bushing using Extension Housing Bushing Replacer T77L-7697-F, or equivalent.
NOTE: Inspect counterbore of extension housing for burrs. If necessary, remove burrs with an oil stone.
CAUTION: The lube hole in the bushing must be aligned with the lube groove in the extension housing 3 o'clock position from top when viewed
from rear.
Oil Seal (1)
^
Install the oil seal using Extension Housing Seal Replacer T74P-77052-A, or equivalent.
CAUTION: Position new output shaft and extension housing oil seal with drain hole positioned facing down.
