B4000 Regular Cab 4WD V6-4.0L OHV (1997)
Clutch Master Cylinder: Service and Repair
Replacement
CAUTION: Be careful not to spill clutch fluid on a painted surface. If spilled, wipe it off immediately.
REMOVAL
Remove in the order shown in the illustration, referring to the following note:
Clutch Pedal Position Switch Plastic Retainer
^
Remove the retainer as shown in the illustration.
Clutch Pedal Position Switch (2)
1. Pull the orientation clip away from the switch to separate from the pin on the switch.
2. Rotate the switch to expose the location of the plastic retainer.
3. Remove the switch from the push rod.
Clutch Pipe (4)
CAUTION: After removing the clutch pipe, plug it to avoid fluid leakage.