B4000 Regular Cab 4WD V6-4.0L OHV (1997)
3. Remove the brake line junction block.
4. Remove the nuts and U-bolts.
5. Carefully lower the rear axle casing.
INSTALLATION
Install in the reverse order of removal, referring to the following steps.
Rear Axle Casing (7)
1. Raise the rear axle casing into the vehicle.
2. Install the U-bolts and nuts.
3. Tighten the nuts to 88 - 108 Nm (65 - 80 ft. lbs.).
