B4000 Regular Cab 4WD V6-4.0L OHV (1997)
4. Install the brake line into the clip.
5. Screw the vent hose into the vent.
Shock Absorber (5)
^
Tighten shock absorber to 54 - 82 Nm (40 - 60 ft. lbs.).
Vent Hose (2)
^
Install the brake line junction block. Tighten bolt to 14 - 20 Nm (10 - 15 ft. lbs.).
AFTER INSTALLATION
1. Install the wheel and tire assemblies. Tighten lug nuts to 115 - 155 Nm (85 - 115 ft. lbs.).
2. Fill the differential with the specified amount and type of oil.
3. Bleed the brake lines. Refer to Brakes and Traction Control.