B4000 Regular Cab 4WD V6-4.0L OHV (1997)
Shift Linkage: Adjustments
1. Raise the rubber boot to access the top of the cam plate.
2. Loosen bolts "A" and "B" one turn.
3. Move the shift shaft lever to the 4L position "C".
4. Rotate the cam plate clockwise around bolt "A" until the shift shaft contacts point "D".
5. While holding the cam plate, tighten bolt "A" first then "B". Tightening torque:
^
Bolt A: 94 - 122 Nm (70 - 90 ft. lbs.)
^
Bolt B: 43 - 56 Nm (32 - 41 ft. lbs.)
6. Verify engagement in all positions.