B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
4. Remove the four backing plate-to-axle flange nuts and bolts and the brake backing plate.
BRAKE SHOES AND LININGS INSTALLATION NOTE
1. Compress the parking brake cable spring and attach the parking brake lever.
2. Clean and lubricate the brake backing plate.
3. Attach the parking brake lever to the rear brake shoe and lining and secure the parking brake lever pin retainer.
4. Position brake shoes and linings (1).
5. Install the brake shoe hold-down spring pins and the brake shoe hold-down springs (2).
PARKING BRAKE INSTALLATION NOTE
1. Install the parking brake link spring and the parking brake spring retainer on the parking brake strut.
2. Install the parking brake strut.
3. Install the brake shoe anchor pin guide plate.
PRIMARY SHOE-RETURN SPRING INSTALLATION NOTE
1. Place adjusting cable over the anchor pin, with crimped side in.
2. Install the short brake shoe retracting spring.
