B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
SECONDARY SHOE-RETURN SPRING INSTALLATION NOTE
Note Make sure the brake shoe adjusting lever cable is positioned in the cable guide groove.
1. Install the long brake shoe retracting spring.
1) Install the cable guide.
2) Position the brake shoe adjusting lever cable in the cable guide groove.
3) Install the long brake shoe retracting spring.
ADJUSTER SCREW INSTALLATION NOTE
Note To prevent incorrect installation, the socket end of each brake adjuster screw is stamped R or L.
1. Assemble the brake adjuster screw assembly.
1) Apply grease or an equivalent silicone compound.
2) Install the brake adjuster screw into the brake shoe adjusting screw nut to the end of the threads, and then loosen one-half turn.
3) Install the brake shoe adjusting screw socket on the brake shoe adjusting screw nut.
2. Install the brake adjuster screw assembly.
1) Position the brake adjuster screw assembly.
2) Install the brake shoe adjusting screw spring.
3) Position the brake shoe adjusting lever cable.
4) Position the adjusting lever return spring and the brake shoe adjusting lever.
5) Hook the brake shoe adjusting lever cable to the brake shoe adjusting lever.
3. Test the operation of the automatic self-adjuster.