B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
1. Clean the sealing surfaces.
2. Apply a bead of silicone rubber in four places.
3. Install the lower intake manifold gasket.
Lower Intake Manifold Bolt Installation Note
1. Using the guide pins, install the intake manifold. Tighten the bolts in sequence in four steps.
Tightening torque 3 Nm (0.3 kgf-m, 27 inch lbs.)
Tightening torque
Tighten to 10 Nm (1.0 kgf-m, 89 inch lbs.)
Tightening torque
Tighten to 13 Nm (1.3 kgf.m, 10 ft. lbs.)
Tightening torque
Tighten to 16 Nm (1.6 kgf-m, 12 ft. lbs.)
