mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Lighting and Horns > < Temperature Gauge - Fluctuates/Knock/Thump Noise|Page 5094
Page 1
background image

Temperature Sensor (Gauge): Service and Repair

WATER TEMPERATURE SENDER UNIT REMOVAL/INSTALLATION

1. Remove the radiator cap.

2. Disconnect the water temperature sender wire.
3. Remove the water temperature sender unit.
4. Apply sealant to the threads of the new water temperature sender unit.
5. Install in reverse order of removal.

Tightening torque: 11 - 24 Nm (1.1 - 2.4 kgf.m, 8 - 18 ft. lbs.)

Lighting and Horns > < Temperature Gauge - Fluctuates/Knock/Thump Noise|Page 5094