B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
18. Disconnect the vacuum line and remove the vacuum line harness.
19. Remove the bolt.
20. Disconnect the fuel line.
21. Remove the stud bolts.
22. Remove the fuel rail and remove the fuel injectors.
23. Remove and discard the gasket.
24. Install in reverse order of removal.
Installation Note
CAUTION: Never use silicone grease. It will clog the fuel injectors. Make sure the injector end caps are clean and free of contamination.
NOTE: Lubricate the fuel injectors prior to installation.
1. Install the fuel injectors.
1. Lubricate the O-rings with engine oil.
2. Connect the vacuum line.