B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
4. Remove the clamps.
5. Loosen the nuts. Clean and lubricate the nut(s) and front wheel spindle tie rod threads.
6. Rotate the front wheel spindle tie rods.
7. Tighten the nuts.
8. Install the clamps.
9. Recheck the toe settings.
RIDE HEIGHT ADJUSTMENT
1. Drive the vehicle onto a runway lift.
2. Jounce the vehicle's front and rear suspension to normalize the vehicle static ride height.
3. Measure the distance between the front suspension lower arm bushing center bolt and the runway lift.
4. Measure the distance between the front suspension lower arm (lowest point) and the runway lift. Record the measurement.