B4000 SE Cab Plus 4 4WD V6-4.0L OHV (2000)
4. Remove the EPC, SS2, and CCS/SS4 solenoid.
Caution Do not pry on the other wires or damage the connector case surface.
8. Disconnect the Turbine Shaft Speed (TSS) sensor electrical connector from the transmission case (16 pin) electrical connector.
1. Disconnect the TSS sensor electrical connector.
2. Remove from the TSS sensor wire locator.
Caution Do not overstretch the retaining spring.
9. Remove the transmission case (16 pin) electrical connector retaining spring.
Caution Do not damage the connector or harness.
10. Remove the transmission case (16 pin) electrical connector.
1. Compress the tabs on the transmission case (16 pin) electrical connector.
