B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
Brake Master Cylinder: Adjustments
PUSH ROD ADJUSTMENT
1. Remove the brake master cylinder.
Caution: Do not apply the brake pedal with the master cylinder removed from the booster.
2. Adjust the power brake booster to brake master cylinder push rod, vacuum applied.
(1 Measure the power brake booster to brake master cylinder push rod.
(2 If necessary, adjust the screw to the proper length.
24.89 - 25.27 mm (0.98 - 0.995 inch)
3. Install the brake master cylinder.
