B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
Cylinder Head Gasket: Service and Repair
CYLINDER HEAD GASKET REMOVAL / INSTALLATION
Removal
Caution:
^
If the fuel supply manifold is used as a leverage device, damage may occur to the supply manifold. Care must be taken when working around the
fuel supply manifold.
1. Remove the intake manifold.
2. Remove the roller followers.
3. Remove the fan shroud.
4. Remove the accessory drive belt.
5. Disconnect the generator wiring.
6. Remove drive belt tensioner.
7. Remove the generator mounting bracket.
8. Remove the bolt and the wiring harness routing clip.
