B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
Install the special tool.
9. CAUTION: The right-hand camshaft sprocket bolt is a left-hand threaded bolt.
Using the special tool, loosen the RH camshaft sprocket bolt.
10. NOTE: The camshaft timing slots are off-center.
Position the camshaft timing slots below the centerline of the camshaft to correctly fit the special tools and install the special tools on the front of
the RH cylinder head.
11. Raise and support the vehicle.
12. Remove the RH wheel and tire.
13. Remove the RH lower splash shield.
