B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
5. Tighten the nuts.
Note: This lower suspension arm caster split adjuster is for factory use only. It is not recommended for adjustment in the field.
Camber and Caster Adjustment - 4x4
1. Remove the nuts and alignment plates.
2. Install the service cams and the nuts.
Note: A pry bar can be used between the front suspension arm bushing joint and the frame pocket to aid in moving the arm.
3. To increase the LF caster and camber, use the following steps.