B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
14. Install the alignment pins into the transmission case.
15. Install a new gasket and separator.
Note:
-
Make sure main control to case gasket is properly aligned.
Use petroleum jelly to hold gasket in place.
16. Install the control valve body assembly.
1. Position the assembly using the SSTs as a guide.
Note: The main control valve body bolts will be tightened in later steps.
2. Loosely install the four M6 x 45 mm main control valve body halts
