B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
26. Use SST 49 S120 710 tool to hold the companion flange while tightening the pinion nut.
Note: If the original recorded preload is lower than specifications, tighten to the appropriate specifications for used bearings. If the preload is
higher than specification, tighten the nut to the original reading as recorded.
Pinion bearing preload (new pinion bearings)
Tightening torque 1.8 - 3.3 Nm (18.4 - 34 kgf-cm, 16 - 29 inch lbs.)
Pinion bearing preload (used pinion bearings)
Tightening torque 0.9 - 1.5 Nm (9.1 - 15.3 kgf-cm, 8 - 14 inch lbs.)
27. Install the differential case in the rear axle housing.
