B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
Slip Yoke: Service and Repair
Cardan Yoke Flange
SINGLE CARDAN UNIVERSAL JOINT (FLANGE YOKE) DISASSEMBLY / ASSEMBLY
Disassembly
1. Remove the propeller shaft.
Caution: Do not clamp the propeller shaft in a vise or similar holding fixture.
2. Place the propeller shaft on a suitable workbench, being careful not to damage the tube.
Note: If components are not marked and installed correctly, driveline imbalance can occur.
3. Mark the positions of the propeller shaft components.
4. Clamp U-Joint Tool SST 205-086 (T74P-4635-C) or equivalent in a vise.
5. Remove all four of the snap rings.
6. Remove the propeller shaft flange yoke.
1. Position the propeller shaft flange yoke in U-Joint Tool SST 205-086 (T74P-4635-C) or equivalent.
2. Press out a bearing cup.
3. Remove the propeller shaft flange yoke.
4. Press on the spider to remove the remaining bearing cup.
5. Remove the propeller shaft flange yoke.
