B4000 SE Cab Plus 4 4WD V6-4.0L SOHC (2001)
Seals and Gaskets: Service and Repair
Standard Differential
REAR WHEEL BEARING AND OIL SEAL (STANDARD) REMOVAL/ INSTALLATION
Removal Note
1. Remove the axle shaft.
Note: If the wheel bearing oil seal is leaking, the axle housing vent may be plugged.
2. Use Impact Slide Hammer SST 49-0223-630B, Rear Axle Bearing Remover SST 49-UN01-033 and Adapter SST 49-UN11-101 to remove the
rear axle bearing and wheel bearing oil seal.
Installation Note
1. Lubricate the new rear wheel bearing with lubricant.
2. Use Driver Handle SST 49-F027-003 and Axle Tube Bearing Replacer SST 49-H025-001 to install the rear wheel bearing.
3. Lubricate the lip of the new wheel bearing oil seal with appropriate grease.
4. Use Driver Handle SST 49-F027-003 and Axle Tube Bearing Replacer SST 49-H025-001 to install the inner wheel bearing oil seal.
5. Install the axle shaft.
