Power Window Switch Repair for B4000 SE Cab Plus 4 4WD V6-40L SOHC (2001)
Power Window Switch: Service and Repair
POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION
1. Remove the two screws and reposition door trim finish panel.
2. Remove in order as shown below.
1. Screws
2. Switch plate
3. Switch
3. Install in reverse order of removal.
Tightening torque:
2 - 3 N.m { 20 - 31 kgf.cm, 18 - 26 in.lbf }