B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
ABS Hydraulic Unit: Service and Repair
1. Jack up the front of the vehicle and support it on safety stands.
2. Remove the left front wheel.
3. Remove the left front fender apron and the nut retaining the hydraulic unit.
4. Lower the vehicle and remove the remaining components in the order shown.
5. Install in the reverse order of removal, noting the following:
^
Mounting nut torque 11-13 Nm (8-10 ft. lbs.).
^
Line nut torque 15-20 Nm (11-14 ft. lbs.).
6. Bleed the brake system. See: Brake Bleeding/Service and Repair
