B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
e. Unfasten the right wiring harness from clip.
f.
Remove the right cylinder head cover bolts, reinforcement plates.
7. If removing the left cylinder head cover, perform the following:
a. Remove the upper intake manifold.
b. Disconnect the A/C compressor clutch connector, if equipped.
c. Remove the A/C compressor bolts, if equipped. Position the A/C compressor aside.
d. Remove the power brake vacuum hose.
e. Disconnect and tag the hoses connected to the vacuum tee.
f.
Disconnect and remove the PCV valve.
g. Unfasten the left wiring harness from clip.
h. Remove the fuel hose clip bolt and position the fuel hoses to gain access to left cylinder head upper bolts.
i.
Remove the left cylinder head cover bolts, reinforcement plates.