mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Multifunction Switch <--> [Combination Switch]|Testing and Inspection|Page 6304 > < Check Brake on/Off (BOO) Switch|Page 6300

B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)

Page 1
background image

Multifunction Switch: Testing and Inspection

Multi-Function Switch Continuity Test and Wiring Checkout

Testing for electrical malfunctions can be accomplished using a continuity tester or suitable ohmmeter. Prior to testing, make sure hazard knob is
pushed in fully to the OFF position. Disconnect the multifunction switch connector and perform the following continuity tests.

1. Multi-function switch.

Multifunction Switch <--> [Combination Switch]|Testing and Inspection|Page 6304 > < Check Brake on/Off (BOO) Switch|Page 6300