B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
Drive Belt: Testing and Inspection
INSPECTION
1. Check the drive belt for wear, cracks, fraying or severe glazing.
2. Replace the belt if any of these conditions are observed.
3. Verify that the drive belt is correctly mounted on the pulleys.
ADJUSTMENT
No adjustment is necessary for the drive belt. The engine is equipped with an automatic tensioner that indicates when the drive belt is worn
(stretched). A pointer and gauge are built into the tensioner. When the pointer no longer registers within the range limits of the gauge, the belt must be
replaced.
