B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
2. Be sure the outlet fitting is directly in line with the square mounting boss of the pump housing plate.
NOTE: Pressure channel in the valve cover fits directly over the recess in the upper plate.
Retaining Ring (5)
1. Place the pump assembly in C-clamp T74P-3044-A1, or equivalent and compress the valve cover in the pump housing plate, until the retaining
ring groove is exposed in the pump housing plate.
2. Install the retaining ring with the ends near the access hole in the pump housing plate.
O-ring (7)
Apply petroleum jelly to the reservoir O-ring seal and the inside edge of the reservoir.
