B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
1. Disconnect the clutch pipe from the transmission using Clutch Disconnect Tool T88T-70522-A, or equivalent.
2. Slide the white plastic sleeve toward the clutch release cylinder while applying a slight tug on the pipe.
INSPECTION
Inspect all parts and repair or replace as necessary.
INSTALLATION
Install in the reverse order of removal, referring to the following note:
Clutch Master Cylinder (6)
1. Bench bleed master cylinder See: Bench Bleeding Procedure
2. Install the clutch master cylinder and bolts. Tighten to 11 - 15 Nm (96 - 132 inch lbs.).
AFTER INSTALLATION
Bleed the clutch system. See: Clutch Fluid/Service and Repair
