B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
3. If the bearing cup cannot be pressed out all the way, remove it with a vise grip or channel lock pliers.
4. Reposition the yoke in the tool 180° to press on the spider, and remove the remaining bearing cup from the opposite side.
5. For front propeller shafts with double cardan U-joints, thread the tool clockwise until the bearing cup protrudes approximately 9.5 mm (0.374
inch) out of the center yoke.
6. For the front propeller shaft, position the bearing cup in a vise and tap on the center yoke to free it from the bearing cup.
7. For the front propeller shaft. Lift the two bearing cups from the spider.
8. Remove the remaining bearing cups in the same manner.
Spider (3)
