mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
4X4 Tranmission Select Switch <--> [Four Wheel Drive Selector Switch]|Specifications|Page 3934 > < 4X4 Tranmission Select Switch <--> [Four Wheel Drive Selector Switch]|Specifications|Page 3932

B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)

Page 1
background image

4X4 Tranmission Select Switch: Testing and Inspection

1. Remove the 4x4 shift control switch and disconnect the connector from the switch.
2. Check the resistance between the terminals of the switch. Resistance:

Between terminals (A)-(D) always approximately 18 ohms.
Between terminals (B)-(C):
^

2WD-approximately 3.9 kilo ohms 

^

4x4 HIGH-approximately 1.1 kilo ohms 

^

4x4 LOW-approximately 360 ohms 

3. If not as specified, replace the 4x4 shift control switch.

4X4 Tranmission Select Switch <--> [Four Wheel Drive Selector Switch]|Specifications|Page 3934 > < 4X4 Tranmission Select Switch <--> [Four Wheel Drive Selector Switch]|Specifications|Page 3932