B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
^
4L
NOTE: Reconnect electronic shift motor assembly to vehicle harness connector and shift the transfer case to the desired position. Verify that
the shift position sensor has moved to the correct chosen transfer case position.
^
If continuity is correct in all positions, go to transfer case troubleshooting guide.
^
If continuity readings are inaccurate, loosen switch screws and adjust switch position sensor until correct continuity readings are obtained in all
corresponding transfer case positions.
^
If continuity readings are not attainable, replace the shift motor assembly.
NOTE: View shift motor positions by holding shift motor as shown.