B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
Vent Hose
^
Install the vent assembly with the white mark in the shifter notch.
NOTE: The upper end of the vent hose should be 19 mm (3/4 inch) above the top of the shift lever assembly and just below the floor pan.
Rubber Boot And Floor Pan Cover
^
Install the rubber boot and floor pan cover. Tighten bolts to 5 - 9 Nm (3.7 - 6.6 ft. lbs.).
Shift Ball
1. Heat the shift ball with a heat gun to 60 - 87°C (140 - 190°F).
2. Tap the shift ball onto the shift lever.
NOTE: The shift ball should be installed to the knurl on the upper portion of the shift lever.
