B4000 SE Cab Plus 4WD V6-4.0L OHV (1997)
Front Door Window Glass: Service and Repair
1. Remove door trim panel and watershield.
2. Raise glass to full up position.
3. Remove in the order shown in the figure.
REMOVAL NOTE
^
Rivets
-
Lower glass to gain access to front window channel bracket and rivets.
NOTE
^
Use care when drilling not to damage glass bracket and spacer/retainers.
-
Remove center pin from rivets using drift punch. Then, use 6.35 mm (1/4-inch) drill and drill out each rivet.
4. Install in the reverse order of removal.
