B4000 SE Cab Plus 2WD V6-4.0L OHV (1998)
Combination Switch: Service and Repair
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
3. If equipped, remove the tilt wheel handle.
4. Remove the upper and lower steering column shrouds.
5. Remove in order shown.
1. Screws
2. Connectors
3. Switch
6. Install in reverse order of removal.
Tightening torque: 2 - 3 N.m (20 - 31 kgf.cm, 18 - 26 in.lbf)