B4000 SE Cab Plus 2WD V6-4.0L OHV (1998)
Tail Lamp: Service and Repair
1. Pull out the rear lamp assembly.
1. Remove the screws.
2. Pull out the rear lamp assembly.
2. Remove the rear lamp assembly.
1. Disconnect the connectors.
2. Remove the rear lamp assembly.
3. Install in reverse order of removal.
Tightening torque: 2.1 - 2.9 N.m (21 - 30 kgf.cm, 18 - 26 in.lbf)